00166 Drim

00166 Drim

00166 DRIMM

SRP: $4998

           19" (up charge) $5580

Adaptable: choose tree, stirrup bar, seat, flaps, panels, knee rolls, girth straps and leather as you wish

  1. New shock protection.

In viscoelastic 'memory foam' with 4cms soft silicon.

  1. An extra comfortable seat.

Made from 3 layers of rubber; 2 layers of ELAX high density silicon and one layer of latex.

  1. With flexible, durable tree/seat.

New 2.5cms higher protection of croupon leather and moulded material to avoid damage to the tree in the event of a fall or knock.

  1. New dual density tree, with different densities for horse and rider.

The anatomically designed tree made from polypropylene with EPDM and talc (EPDM is an extremely durable type of synthetic rubber, an elastomer. The E refers to ethylene, P to propylene, D to diene). The dual density tree allows for many characteristics of rigidity, deformation and absorption of energy where needed in different areas. This is the result of the continued process of Research and Development made in conjunction with CIDAUT (Foundation for Research and Development in Transport and Energy). This new tree has the ability to adjust completely to the back of the horse a development which together with the dual density gives benefits to both horse and rider. At the bottom part of the tree (1.5cms in thickness), the part that is contact with the horse's back the foam is designed to expand and spread the rider's weight over the horse's back, so avoiding pressure points. With 10% elasticity to allow reverse rotation, so giving the horse full freedom of movement.

This is the product of years of study for the optimum density to distribute weight evenly across the horse's back, to spread the pressure in a homogeneous way so to avoid overloading the dorsal muscle mass and in this way eliminating restrictions on pressure points that could degenerate into mechanical problems and pain for the horse.

Incorporating an open structure in the back and arms of the tree to allow full adaption for the back and neck. The top side of the tree has been optimized in design (0.5cms thick) for rider comfort, it is elastic, absorbs shock and allows free passage of the horse's energy. It is durable and resistant in long term use. The weight of the rider, taken from the points of contact, is spread over the surface providing a feeling of weightlessness without pressure points. Spreading the weight evenly gives a positive result and makes riding more enjoyable.

The rider contact area is ergonomically designed, lifting the lateral areas to release pressure on the urethra, so avoiding possible health problems in later years and allowing full and unrestricted blood flow.

The top surface is slightly curved, to adapt to the rider and give optimum comfort while helping to push the pelvis forward and keep the back in a correct and comfortable riding position.

  1. New Intelligent panels, with incorporated wither pad.

Consisting of 1cm layer 'memory foam' wither pad with moisture resistant wool filling to avoid lumps or voids.

  1. Comfortable trim. The trim where saddle and flaps join has been redesigned for comfort and to avoid pressure on the inside thigh when riding.
  2. Ergonomic flaps. Helps the rider adjust to an optimum position.
  3. Reinforced with an 'anti sanding' effect. Made in croupon leather giving greater durability to the saddle.
  4. Double sewn girth straps. Reinforced and double stitched with waxed thread for maximum strength.
  5. The first girth strap is elasticated, for easy movement and to allow the horse to breathe freely whilst also releasing pressure on the horse's back. The second girth strap is in a V configuration which is good in any saddle as it avoids saddle roll and helps to release pressure on the shoulder.
  6. Knee rolls with air intake. The knee rolls contain a row of air holes to allow circulation of air which gives correct pressure and support at all times.
  7. New anatomically shaped dual density knee roll, providing strength in the upper section and more flexibility in the lower part.
  8. Anatomic panels. The new series of panels are made in a triangular shape for easy movement of the horse and to adapt to pressure caused by the rider's weight.
  9. Close contact effect. The flaps are attached directly to the panels, with 10cm stitching along the entire length to prevent displacement of the flaps in use.
  10. Long Sprenger stirrup bars, at an angle of 45°, so hindering foot slippage from the stirrup. The top quality stirrup bars carry the Sprenger guarantee.
  11. for the rider: seat sizes  16 to 18 (upcharge) 18.5 to 19"
  12. For the horse: 28-34cm
  13. APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE 16" 
    -
    APPROXIMATE MEASUREMENTS OF THIS SADDLE IN SIZE:
    16" Length of the flap from the stirrup bar 38 cm- Length of the panel in the underside: 46cm
    16.5" Length of the flap from the stirrup bar 39 cm- Length of the panel in the underside: 44cm 
    17” Length of the flap from stirrups bar: 40cm Length of the panel in the underside: 48cm
    17.5” Length of the flap from stirrups bar: 41cm Length of the panel in the underside: 49cm
    18” Length of the flap from stirrups bar: 42cm Length of the panel in the underside: 50cm
    TM block block: 20cm high x 8.5cm wide x 9cm 
    Weight: 7.4kg
    Made in Spain by Zaldi

 

 

zaldi saddle option upgrades   

Kira klass block options

Same block options are available for the Drim.

CONFIGURADOR ZALDI DRIM KIRAKLASS V260718v2 Page 1CONFIGURADOR ZALDI DRIM KIRAKLASS V260718v2 Page 2CONFIGURADOR ZALDI DRIM KIRAKLASS V260718v2 Page 3CONFIGURADOR ZALDI DRIM KIRAKLASS V260718v2 Page 4

How To Order

Related Products

Testimonials

  • Europa 2G

    Europa 2G

    Hello! I just wanted to thank you again for this beautiful saddle! Last weekend I showed my girl at the Pinto National show and we won our English Equitation class and placed in the ribbons in our English Pleasure class as well. I cannot rave about this saddle enough! The quality of the leather and craftsmanship is top notch. It is the most comfortable saddle I’ve ever ridden in. It fits my horse like a glove and just effortlessly seats you in the proper equitation position. Not to mention - it looks pretty dang sexy in the show ring! Thank you again for all your help in designing my saddle - it’s even more than I was hoping for!😊

    Corinne Toronchuk

  • Project Coordinator
    Love My Saddle!

    Love My Saddle!

    Love My Saddle!

    I just wanted to let you know that I absolutely love love love my saddle! Its beautiful and it turned out better than I ever dreamed! It’s already made such a huge difference for me and for Gus in our riding. It fits him like a glove and he goes so well in it. There is no shifting or sliding around and I feel so secure in it. It’s so nice to not have to feel like I need to keep readjusting the saddle as I’m riding. It’s the absolute best fitting saddle (probably the only saddle that’s ever truly fit) I’ve ever put on him in the seven and a half years I’ve had him. I can’t thank you enough for everything and all the time that you spent helping me and getting this saddle ordered for me! I attached a pic of us from our lesson tonight! Hopefully I can get some better pictures of him in the saddle over the weekend! 

    Michaela

     

  • Love my New Kent

    Love my New Kent

     I want to say I love my saddle and couldn’t be happier with it after a long struggle, I now have a horse who no longer has a sore back or shoulders.

    I would like to order a  San Jorge bridle.....         Laura Lee Crook

  • Shea Erhart

    Shea Erhart

    1300 Flex Fit..... tried out my new saddle yesterday, it was great! Thought I would send u some pics, it even fit my big gelding who is unfittable in a western saddle, super excited!      Shea Elhart